<?xml version="1.0" encoding="ISO-8859-1"?>
<?xml-stylesheet type="text/xsl" href="./fgdc_classic_fgdl.xsl"?>
<!DOCTYPE metadata SYSTEM "http://www.fgdc.gov/metadata/fgdc-std-001-1998.dtd">
<metadata>
  <idinfo>
    <citation>
      <citeinfo>
        <origin>U.S. Army Corps of Engineers</origin>
        <pubdate>20201201</pubdate>
        <title>National Inventory of Dams (NID) in Florida - 2019</title>
        <geoform>vector digital data</geoform>
        <pubinfo>
          <pubplace>Washington, DC</pubplace>
          <publish>U.S. Army Corps of Engineers</publish>
        </pubinfo>
        <othercit>State of Florida</othercit>
        <onlink>https://nid.sec.usace.army.mil</onlink>
      </citeinfo>
    </citation>
    <descript>
      <abstract>This dataset contains the State of Florida subset of the 2019 National Inventory of Dams (NID). The NID is a congressionally authorized database, which documents dams in the U.S. and its territories. The NID is maintained and published by USACE, in cooperation with the Association of State Dam Safety Officials (ASDSO), the states and territories, and federal dam-regulating agencies. The database contains information about the dam&#8217;s location, size, purpose, type, last inspection, regulatory facts, and other technical data. The information contained in the NID is updated approximately every two years. State and federal dam regulators provided their data from May to November 2018 for inclusion in the 2018 database. A partial NID update was conducted (Nov 2019- Jan 2020) with updated data from several state dam safety offices. Please be aware that inspection and EAP dates reflect 2019 data, so any inspections or updates since then will not be reflected in the current NID. USACE manages the NID but does not own most of the dams in the NID. Operation, maintenance, and repair of these dams is the responsibility of each dam owner. Please contact the respective state or federal regulatory authority for the most up-to-date information. This layer is an update to the FGDL layer USACE_DAMS_2018.</abstract>
      <purpose>The goal of the NID is to include all dams in the U.S. that meet these criteria, yet in reality, is limited to information that can be gathered and properly interpreted with the given funding. The Inventory initially consisted of approximately 45,000 dams, which were gathered from extensive record searches and some feature extraction from aerial imagery. Since continued and methodical updates have been conducted, data collection has been focused on the most reliable data sources, which are the various federal and state government dam construction and regulation offices.</purpose>
      <supplinf>Congress first authorized the US Army Corps of Engineers to inventory dams in the United States with the National Dam Inspection Act (Public Law 92-367) of 1972. The NID was first published in 1975, with a few updates as resources permitted over the next ten years. The Water Resources Development Act of 1986 (P.L. 99-662) authorized the Corps to maintain and periodically publish an updated NID, with re-authorization and a dedicated funding source provided under the Water Resources Development Act of 1996 (P.L. 104-3). The Corps also began close collaboration with the Federal Emergency Management Agency (FEMA) and state regulatory offices to obtain more accurate and complete information. The National Dam Safety and Security Act of 2002 (P.L. 107-310) reauthorized the National Dam Safety Program and included the maintenance and update of the NID by the Corps of Engineers. The most recent Dam Safety Act of 2006 reauthorized the maintenance and update of the NID. The NID consists of dams meeting at least one of the following criteria; 1) High hazard classification - loss of one human life is likely if the dam fails, 2) Significant hazard classification - possible loss of human life and likely significant property or environmental destruction, 3) Equal or exceed 25 feet in height and exceed 15 acre-feet in storage, 4) Equal or exceed 50 acre-feet storage and exceed 6 feet in height.</supplinf>
    </descript>
    <timeperd>
      <timeinfo>
        <rngdates>
          <begdate>19750101</begdate>
          <enddate>20191231</enddate>
        </rngdates>
      </timeinfo>
      <current>publication date</current>
    </timeperd>
    <status>
      <progress>Complete</progress>
      <update>As needed</update>
    </status>
    <spdom>
      <bounding>
        <westbc>-87.503671</westbc>
        <eastbc>-79.884637</eastbc>
        <northbc>31.027171</northbc>
        <southbc>25.270512</southbc>
      </bounding>
    </spdom>
    <keywords>
      <theme>
        <themekt>ISO 9115 Topic Category</themekt>
        <themekey>inland Waters</themekey>
        <themekey>structure</themekey>
      </theme>
      <theme>
        <themekt>None</themekt>
        <themekey>Dams</themekey>
        <themekey>Structure</themekey>
        <themekey>National Inventory of Dams</themekey>
        <themekey>NID</themekey>
      </theme>
      <place>
        <placekt>None</placekt>
        <placekey>Florida</placekey>
      </place>
      <temporal>
        <tempkt>None</tempkt>
        <tempkey>2018</tempkey>
      </temporal>
    </keywords>
    <accconst>None</accconst>
    <useconst>The Florida Geographic Data Library is a collection of Geospatial Data compiled by the University of Florida GeoPlan Center with support from the Florida Department of Transportation. GIS data available in FGDL is collected from various state, federal, and other agencies (data sources) who are data stewards, producers, or publishers. The data available in FGDL may not be the most current version of the data offered by the data source. University of Florida GeoPlan Center makes no guarantees about the currentness of the data and suggests that data users check with the data source to see if more recent versions of the data exist. Furthermore, the GIS data available in the FGDL are provided 'as is'. The University of Florida GeoPlan Center makes no warranties, guaranties or representations as to the truth, accuracy or completeness of the data provided by the data sources. The University of Florida GeoPlan Center makes no representations or warranties about the quality or suitability of the materials, either expressly or implied, including but not limited to any implied warranties of merchantability, fitness for a particular purpose, or non-infringement. The University of Florida GeoPlan Center shall not be liable for any damages suffered as a result of using, modifying, contributing or distributing the materials. A note about data scale: Scale is an important factor in data usage. Certain scale datasets are not suitable for some project, analysis, or modeling purposes. Please be sure you are using the best available data. 1:24000 scale datasets are recommended for projects that are at the county level. 1:24000 data should NOT be used for high accuracy base mapping such as property parcel boundaries. 1:100000 scale datasets are recommended for projects that are at the multi-county or regional level. 1:125000 scale datasets are recommended for projects that are at the regional or state level or larger. Vector datasets with no defined scale or accuracy should be considered suspect. Make sure you are familiar with your data before using it for projects or analysis. Every effort has been made to supply the user with data documentation. For additional information, see the References section and the Data Source Contact section of this documentation. For more information regarding scale and accuracy, see our webpage at: http://geoplan.ufl.edu/education.html</useconst>
    <ptcontac>
      <cntinfo>
        <cntorgp>
          <cntorg>USACE - Army Geospatial Center</cntorg>
          <cntper>Rebecca Ragon</cntper>
        </cntorgp>
        <cntpos>Geospatial Systems Directorate, Technology Integration Branch</cntpos>
        <cntaddr>
          <addrtype>mailing and physical</addrtype>
          <address>7701 Telegraph Road</address>
          <city>Alexandria</city>
          <state>VA</state>
          <postal>22315</postal>
          <country>US</country>
        </cntaddr>
        <cntvoice>703-428-6820</cntvoice>
        <cntemail>Rebecca.ragon@usace.army.mil</cntemail>
        <cntinst>nid@usace.army.mil</cntinst>
      </cntinfo>
    </ptcontac>
    <datacred>U.S. Army Corps of Engineers</datacred>
    <native>Version 6.2 (Build 9200) ; Esri ArcGIS 10.8.1.14362</native>
    <crossref>
      <citeinfo>
        <othercit>USACE National Dam Inventory Homepage: https://nid.sec.usace.army.mil</othercit>
      </citeinfo>
    </crossref>
  </idinfo>
  <dataqual>
    <attracc>
      <attraccr>GeoPlan relied on the integrity of the attribute information within the original data.</attraccr>
    </attracc>
    <logic>This data is provided 'as is'. GeoPlan relied on the integrity of the original data layer's topology</logic>
    <complete>This data is provided 'as is' by GeoPlan and is complete to our knowledge.</complete>
    <posacc>
      <horizpa>
        <horizpar>This data is provided 'as is' and its horizontal positional accuracy has not been verified by GeoPlan</horizpar>
      </horizpa>
      <vertacc>
        <vertaccr>This data is provided 'as is' and its vertical positional accuracy has not been verified by GeoPlan</vertaccr>
      </vertacc>
    </posacc>
    <lineage>
      <srcinfo>
        <srccite>
          <citeinfo>
            <geoform>tabular digital data</geoform>
          </citeinfo>
        </srccite>
        <srcscale>0</srcscale>
        <typesrc>onLine</typesrc>
        <srccitea>USACE</srccitea>
        <srccontr>Spatial and Attribute Information</srccontr>
      </srcinfo>
      <procstep>
        <procdesc>A partial NID update was conducted (November 2019 - January 2020) as several state dam safety offices provided updated data for some of their dams. This updated information has been incorporated into the NID database. All charts, queries and maps reflect this most current NID database. A complete list of participants and updated data is available from the Downloads section. The next full NID update will be conducted later this year.</procdesc>
        <srcused>USCAE</srcused>
        <procdate>20200301</procdate>
      </procstep>
      <procstep>
        <procdesc>GeoPlan downloaded the Florida subset of the National Inventory of Dams (NID) from the following U.S. Army Corps of Engineers (USACE) website on June 2021. https://nid.sec.usace.army.mil The State of Florida subset excel table (FL_U.xlsx) was available for download from the Downloads (Public) tab. https://nid.sec.usace.army.mil/ords/f?p=105:19:15377754200545::NO::: The table was converted to a CSV file format and imported into a file geodatabase. The "add XY data" tool was then used to create a spatial layer from the XY coordinates provided in the database using the NAD 83 geographic coordinate system. Please Note: The original table downloaded contained 1109 records, however, 1 record contained no Latitude/Longitude information. RECORDID: 8987 | NIDID: FL10111 This layer was exported as a shapefile and projected to FGDL Albers. The following tasks were undertaken once the shapefile was projected: - Uppercased all records. - Renamed several fields that were truncated during the conversion to shapefile process. - Added and calculated the PRIMARY_PU field. - Added and calculated the MGRS and GOOGLEMAP fields. - A DESCRIPT field was added based on Dam Name and NID ID. - A FGDLAQDATE field was added based on date of download. - Updated Metadata based off of information found in the Help tab of the Website.</procdesc>
        <srcused>GeoPlan</srcused>
        <procdate>20210621</procdate>
      </procstep>
    </lineage>
  </dataqual>
  <spdoinfo>
    <direct>Vector</direct>
    <ptvctinf>
      <sdtsterm>
        <sdtstype>Entity point</sdtstype>
        <ptvctcnt>1108</ptvctcnt>
      </sdtsterm>
    </ptvctinf>
  </spdoinfo>
  <spref>
    <horizsys>
      <planar>
        <mapproj>
          <mapprojn>NAD 1983 HARN Florida GDL Albers</mapprojn>
          <albers>
            <stdparll>24.0</stdparll>
            <stdparll>31.5</stdparll>
            <longcm>-84.0</longcm>
            <latprjo>24.0</latprjo>
            <feast>400000.0</feast>
            <fnorth>0.0</fnorth>
          </albers>
        </mapproj>
        <planci>
          <plance>coordinate pair</plance>
          <coordrep>
            <absres>0.0001</absres>
            <ordres>0.0001</ordres>
          </coordrep>
          <plandu>meter</plandu>
        </planci>
      </planar>
      <geodetic>
        <horizdn>D North American 1983 HARN</horizdn>
        <ellips>GRS 1980</ellips>
        <semiaxis>6378137.0</semiaxis>
        <denflat>298.257222101</denflat>
      </geodetic>
    </horizsys>
  </spref>
  <eainfo>
    <detailed>
      <enttyp>
        <enttypl>USACE_DAMS_2019</enttypl>
        <enttypd>USACE_DAMS_2019.DBF</enttypd>
        <enttypds>USACE</enttypds>
      </enttyp>
      <attr>
        <attrlabl>OBJECTID</attrlabl>
        <attrdef>Internal feature number.</attrdef>
        <attrdefs>Esri</attrdefs>
        <attrdomv>
          <udom>Sequential unique whole numbers that are automatically generated.</udom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>Shape</attrlabl>
        <attrdef>Feature geometry.</attrdef>
        <attrdefs>ESRI</attrdefs>
        <attrdomv>
          <udom>Coordinates defining the features.</udom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>RECORDID</attrlabl>
        <attrdef>Record Id.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>8322</rdommin>
            <rdommax>9431</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>DAM_NAME</attrlabl>
        <attrdef>Dam Name (Alphanumeric)
The official name of the dam. No abbreviations unless the abbreviation is a part of the official name. For dams that do not have an official name, the popular name is used.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>DAM_NAME2</attrlabl>
        <attrdef>Other Dam Names (Alphanumeric)
Names other than the official name (i.e., reservoir name) of the dam in common use. Names are separated using a semi-colon. Blank if not applicable.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>DAM_F_NAME</attrlabl>
        <attrdef>Dam Former Name (Alphanumeric)
Previous reservoir or dam name(s), if changed. Names are separated using a semi-colon.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>NIDID</attrlabl>
        <attrdef>NID ID (Alphanumeric)
The official NID identification number for the dam, known formerly as the National ID. This is a required field, and must have an entry for each dam included in the NID. This field is used as the unique identifier for each dam record. The first two characters of the identity are the state two-letter abbreviation, based on the location of the dam. Typically, the last five characters of the identity are a unique number (AB#####); although States are allowed to use alphanumeric combinations in these last five characters.
For saddle dams or dikes, the NID ID is the same as the main dam. See saddle dam definition in Number Separate Structures Field (listed below).</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>LONGITUDE</attrlabl>
        <attrdef>Longitude (Number)
Longitude at dam centerline as a single value in decimal degrees, NAD83.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>-87.502198</rdommin>
            <rdommax>-80.050003</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>LATITUDE</attrlabl>
        <attrdef>Latitude (Number)
Latitude at dam centerline as a single value in decimal degrees, NAD83.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>25.280001</rdommin>
            <rdommax>30.997454</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>SECTION</attrlabl>
        <attrdef>Section, Township, Range Location (Alphanumeric)
Optional field. The information is in any form that is understandable and that clearly designates the individual values, i.e. S21, 73N, R69W. If the prime meridian location is needed to locate the dam within the state, include it in the field, i.e. S21, T3N, R68W of 6PM (Sixth Prime Meridian).</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>COUNTY</attrlabl>
        <attrdef>County (Alphanumeric)
The name of the county in which the dam is located.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>RIVER</attrlabl>
        <attrdef>River or Stream (Alphanumeric)
The River or Stream designation may be entered in one of two ways. For the convenience of some organizations, an alternative field entry is provided which is consistent with the &#8220;tributary and offstream&#8221; designations used in the 1995-96 NID. If the alternative form is used, the NID Data Team will convert it to the standard form prior to inclusion in the national inventory.
River or Stream Standard Entry: The official name of the river or stream on which the dam is built. If the stream is unnamed, identify it as a tributary to a named river, e.g., Snake-TR. If the dam is located offstream, enter the name of the river or stream plus &#8220;-OS&#8221;, e.g., Snake-OS.
River or Stream Alternative Entry: The official name of the river or stream on which the dam is built. If the stream is unnamed, identify it as a tributary to a named river, e.g., TR-Snake. If the darn is located offstream, enter the name of the river or stream plus the word, &#8220;OFFSTREAM,&#8221; e.g., Snake OFFSTREAM.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>CITY</attrlabl>
        <attrdef>Nearest Downstream City/Town (Alphanumeric)
Name of the nearest downstream city, town, or village that is most likely to be affected by floods resulting from the failure of the dam.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>DISTANCE</attrlabl>
        <attrdef>Distance to Nearest City/Town (Miles, Number)
Distance from the dam to the nearest affected downstream city/town/village (listed in the previous field), to the nearest mile (and tenth if appropriate).</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0.0</rdommin>
            <rdommax>49.0</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>OWNER_NAME</attrlabl>
        <attrdef>Owner Name (Alphanumeric)
Name(s) of the dam owner. If multiple owners, different owners are separated by a semi-colon.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>OWNER_TYPE</attrlabl>
        <attrdef>Owner Type (Alphanumeric)
Code to indicate the type of owner:
Codes are concatenated if the dam is owned by more than one type. For example, if the dam is owned by a lake association and a public utility, the owner type would be listed as
PU. For multiple owners under the same type, one code is used. For example, if multiple individuals own one dam, it will list P for private dam ownership.
Some examples of owner types. Local Government should have taxing authority or is supported by taxes. A Lake District is supported by taxes and considered Local Government. A lake association is supported by association dues and would not be a Local Government owner type but rather Private owner type.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>P</edomv>
            <edomvd>Private</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>S</edomv>
            <edomvd>State</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>F</edomv>
            <edomvd>Federal</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>L</edomv>
            <edomvd>Local Government (defined as have taxing authority or is supported by taxes)</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>X</edomv>
            <edomvd>Not Listed</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>DAM_DESIGN</attrlabl>
        <attrdef>Dam Designer (Alphanumeric)
Name of the principal firm(s) or agency accomplishing design of dam and major appurtenant operating features, and major modifications. Original designer is listed first, then modification designers (if applicable). The names are separated using a semi-colon. If an Architect-Engineer Firm designed the dam under a state or federal government contract, the state or federal agency name is listed first; then the company name second separated by a semi-colon.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>PRIVATE_DM</attrlabl>
        <attrdef>Non-Federal Dam On Federal Property (Alphanumeric)
Code indicating whether this dam is a non-federal dam located on federal property:</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>N</edomv>
            <edomvd>No</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>Y</edomv>
            <edomvd>Yes</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>DAM_TYPE</attrlabl>
        <attrdef>Dam Type (Alphanumeric)
Codes, in order of importance, to indicate the type of dam.
Codes are concatenated if the dam is a combination of several types. For example, the entry CNCB would indicate a concrete buttress dam type.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>RE</edomv>
            <edomvd>Earth</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CBRE</edomv>
            <edomvd>Buttress &amp; Earth</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>OT</edomv>
            <edomvd>Other</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>PGRE</edomv>
            <edomvd>Gravity &amp; Earth</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>OTRE</edomv>
            <edomvd>Other &amp; Earth</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CN</edomv>
            <edomvd>Concrete</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>REOT</edomv>
            <edomvd>Earth &amp; Other</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CNRE</edomv>
            <edomvd>Concrete &amp; Earth</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CNOT</edomv>
            <edomvd>Concrete &amp; Other</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>ER</edomv>
            <edomvd>Rockfill</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>RECNOT</edomv>
            <edomvd>Earth &amp; Concrete &amp; Other</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>CORE</attrlabl>
        <attrdef>Code to indicate the position, type of watertight member and certainty. For Position, Type &amp; Certainty.
Position: 
F for upstream facing;
H for homogeneous dam;
I for core;
X for unlisted/unknown;

Type: 
A for bituminous concrete;
C for concrete;
E for earth;
M for metal;
P for plastic;
X for unlisted/unknown;

Certainty: 
K for known;
Z for estimated;</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>HEK</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>IEK</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>X</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>IEZ</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>HEZ</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>C</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>E</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CK</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CHK</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>M</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>PK</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>XZ</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>FOUNDATION</attrlabl>
        <attrdef>Foundation (Alphanumeric)
Code for the material upon which dam is founded, and certainty:
Foundation: 
R for rock;
RS for rock and soil;
S for soil;
U for unlisted/unknown.

Certainty: 
K for known;
Z for estimated.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>SK</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>SZ</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>U</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>RS</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>S</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>K</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>PURPOSES</attrlabl>
        <attrdef>Purposes (Alphanumeric)
Code(s) to indicate the current purpose(s) for which the reservoir is used:
I for Irrigation;
H for Hydroelectric;
C for Flood Control and Storm Water Management;
N for Navigation;
S for Water Supply;
R for Recreation;
P for Fire Protection, Stock, Or Small Farm Pond;
F for Fish and Wildlife Pond;
D for Debris Control;
T for Tailings;
G for Grade Stabilization;
O for Other.

The order should indicate the relative decreasing importance of the purpose. Codes are concatenated if the dam has multiple current purposes. For example, SCR would indicate the primary purposes, Water Supply, followed by Flood Control and Storm Water Management, and then Recreation.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>YEAR_COMP</attrlabl>
        <attrdef>Year Completed (Number)
Year (four digits) when the original main dam structure was completed. If unknown, and reasonable estimate is unavailable, &#8220;0000&#8221; is used.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0</rdommin>
            <rdommax>2009</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>YEAR_MOD</attrlabl>
        <attrdef>Year Modified (Alphanumeric)
Year (four digits) when major modifications or rehabilitation of dam or major control structures were completed. Major modifications are defined as a structural, foundation, or mechanical construction activity which significantly restores the project to original condition; changes the project&#8217;s operation; capacity or structural characteristics (e.g. spillway or seismic modification); or increases the longevity, stability, or safety of the dam and appurtenant structures. Entries should be followed by one of more of the following codes indicating type of modification:
S for structural;
F for foundation;
M for mechanical;
E for seismic;
H for hydraulic;
O for other.
Up to ten modifications can be entered, separated by semicolons.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>DAM_LENGTH</attrlabl>
        <attrdef>Dam Length (Feet, Number)
Length of the dam, in feet, which is defined as the length along the top of the dam. This also includes the spillway, powerplant, navigation lock, fish pass, etc., where these form part of the length of the dam. If detached from the dam, these structures should not be included.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0</rdommin>
            <rdommax>739200</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>DAM_HEIGHT</attrlabl>
        <attrdef>Dam Height (Feet, Number)
Height of the dam, in feet to the nearest foot , which is defined as the vertical distance between the lowest point on the crest of the dam and the lowest point in the original streambed.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0.0</rdommin>
            <rdommax>140.0</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>STRUCTURAL</attrlabl>
        <attrdef>Structural Height (Feet, Number)
Structural height of the dam, in feet to the nearest foot, which is defined as the vertical distance from the lowest point of the excavated foundation to the top of the dam. Top of dam refers to the parapet wall and not the crest.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0</rdommin>
            <rdommax>145</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>HYDRAULIC</attrlabl>
        <attrdef>Hydraulic Height (Feet, Number)
Hydraulic height of the dam, in feet to the nearest foot , which is defined as the vertical difference between the maximum design water level and the lowest point in the original streambed.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0</rdommin>
            <rdommax>104</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>NID_HEIGHT</attrlabl>
        <attrdef>NID Height (Feet, Number)
Calculated field: Maximum value of dam height, structural height, and hydraulic height. Accepted as the general height of the dam.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>2</rdommin>
            <rdommax>145</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>MAX_DSCHRG</attrlabl>
        <attrdef>Maximum Discharge (Cubic Feet/Second, Number)
Number of cubic feet per second (cu ft/sec) which the spillway is capable of discharging when the reservoir is at its maximum designed water surface elevation.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0</rdommin>
            <rdommax>1210800</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>MAX_STRG</attrlabl>
        <attrdef>Maximum Storage (Acre-Feet, Number)
Maximum storage, in acre-feet, which is defined as the total storage space in a reservoir below the maximum attainable water surface elevation, including any surcharge storage.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0</rdommin>
            <rdommax>8519000</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>NORML_STRG</attrlabl>
        <attrdef>Normal Storage (Acre-Feet, Number)
Normal storage, in acre-feet, which is defined as the total storage space in a reservoir below the normal retention level, including dead and inactive storage and excluding any flood control or surcharge storage. For normally dry flood control dams, the normal storage will be a zero value. If unknown, the value will be blank and not zero.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0</rdommin>
            <rdommax>4596000</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>NID_STRG</attrlabl>
        <attrdef>NID Storage (Acre-Feet, Number)
Calculated field: Maximum value of normal storage and maximum storage. Accepted as the general storage of the dam.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0</rdommin>
            <rdommax>8519000</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>SURFC_AREA</attrlabl>
        <attrdef>Surface Area (Acres, Number)
Surface area, in acres, of the impoundment at its normal retention level.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0.0</rdommin>
            <rdommax>467200.0</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>DRAIN_AREA</attrlabl>
        <attrdef>Drainage Area (Square Miles, Number)
Drainage area of the dam, in square miles, which is defined as the area that drains to a particular point (in this case, the dam) on a river or stream.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0.0</rdommin>
            <rdommax>721640.0</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>HAZARD</attrlabl>
        <attrdef>Downstream Hazard Potential (Alphanumeric)
Code to indicate the potential hazard to the downstream area resulting from failure or mis-operation of the dam or facilities:
L for Low;
S for Significant;
H for High
U for Undetermined.
Definitions, as accepted by the Interagency Committee on Dam Safety, are as follows:</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>L</edomv>
            <edomvd>LOW HAZARD POTENTIAL
Dams assigned the low hazard potential classification are those where failure or mis-operation results in no probable loss of human life and low economic and/or environmental losses. Losses are principally limited to the owner&#8217;s property.</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>H</edomv>
            <edomvd>HIGH HAZARD POTENTIAL
Dams assigned the high hazard potential classification are those where failure or mis-operation will probably cause loss of human life.</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>S</edomv>
            <edomvd>SIGNIFICANT HAZARD POTENTIAL
Dams assigned the significant hazard potential classification are those dams where failure or mis-operation results in no probable loss of human life but can cause economic loss, environment damage, disruption of lifeline facilities, or impact other concerns. Significant hazard potential classification dams are often located in predominantly rural or agricultural areas but could be located in areas with population and significant infrastructure.</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>U</edomv>
            <edomvd>UNDETERMINED HAZARD POTENTIAL
Dams for which a downstream hazard potential, as defined in 1-3 above, has not been designated or is not provided. Note that dams with a code &#8220;U&#8221; will be considered for NID inclusion the same as a dam with low hazard potential. If included in the NID, the undetermined classification will be used in publication.</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>EAP</attrlabl>
        <attrdef>Emergency Action Plan (Alphanumeric)
Code indicating whether this dam has an Emergency Action Plan (EAP) developed by the dam owner. An EAP is defined as a plan of action to be taken to reduce the potential for property damage and loss of life in an area affected by a dam failure or large flood.
Y for Yes;
N for No;
NR for Not Required by submitting agency.
If an EAP is required (or not required) and has one, it will be listed Y for Yes. If an EAP is required and does not have one, it will be listed N for No. If there is not an EAP and one is not required, it will be listed NR for Not Required.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>NR</edomv>
            <edomvds>Producer defined</edomvds>
            <edomvd>Not Required</edomvd>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>N</edomv>
            <edomvd>No</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>Y</edomv>
            <edomvd>Yes</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>INSPECT_DT</attrlabl>
        <attrdef>Date of the most recent inspection of the dam prior to the transmittal of the data by the submitting agency.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>INSPECT_FQ</attrlabl>
        <attrdef>Inspection Frequency (Number)
The scheduled frequency interval for periodic inspections, in years.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>0</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>1</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>3</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>5</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>ST_REG_DAM</attrlabl>
        <attrdef>State Regulated Dam (Alphanumeric)
Calculated field: based on Permitting Authority, Inspection Authority and Enforcement Authority. If Yes to all three authority criteria, then dam is state regulated and will be listed as Yes.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>Y</edomv>
            <edomvds>Producer defined</edomvds>
            <edomvd>Yes</edomvd>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>N</edomv>
            <edomvd>No</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>ST_REG_AGE</attrlabl>
        <attrdef>State Regulatory Agency (Alphanumeric)
Name of the primary state agency with regulatory or approval authority over the dam.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>NWFWMD</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>FDEP</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>SWFWMD</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>FL WILDLIFE COMMISSION</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>FDEP/FFWCC</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>SJRWMD</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>SFWMD/FDEP</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>SFWMD</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>COJ</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>FLDOT</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>SPILLWAY_T</attrlabl>
        <attrdef>Spillway Type (Alphanumeric)
Code that describes the type of spillway:
C for Controlled;
U for Uncontrolled;
N for None.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>U</edomv>
            <edomvds>Producer defined</edomvds>
            <edomvd>Uncontrolled</edomvd>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>C</edomv>
            <edomvd>Controlled</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>N</edomv>
            <edomvd>None</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>SPILLWAY_W</attrlabl>
        <attrdef>Spillway Width (Number)
The width of the spillway, to the nearest foot, available for discharge when the reservoir is at its maximum designed water surface elevation. Typically for an open channel spillway, this is the bottom width. For pipe spillways or drop inlets that have diameters, use the diameter of the pipe.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0</rdommin>
            <rdommax>2224</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>OUTLET_GT</attrlabl>
        <attrdef>Outlet Gates (Alphanumeric)
Code(s) that describe the type of (1) spillway and (2) controlled outlet gates, if any:
X for None;
U for Uncontrolled;
T for Tainter (radial);
L for Vertical Lift;
R for Roller;
B for Bascule;
D for Drum;
N for Needle;
F for Flap;
S for Slide (sluice gate);
V for Valve;
O for Other controlled.
Allowed up to five types in decreasing size order, separated by semicolons, followed by number of gates.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>VOLUME</attrlabl>
        <attrdef>Volume of Dam (Cubic yards, Number)
Total number of cubic yards occupied by the materials used in the dam structure. Portions of powerhouse, locks, and spillways are included only if they are an integral part of the dam and required for structural stability.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <rdom>
            <rdommin>0</rdommin>
            <rdommax>54700000</rdommax>
          </rdom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>NUMB_LOCKS</attrlabl>
        <attrdef>Number of Locks (Number)
Number of existing navigation locks for the project.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>0</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>1</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>9</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>LEN_LOCKS</attrlabl>
        <attrdef>Length of Locks (Feet, Number)
Length of the primary navigation lock to the nearest foot.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>0</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>600</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>200</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>400</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>250</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>450</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>73</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>WID_LOCKS</attrlabl>
        <attrdef>Lock Width (Number)
Width of the primary navigation lock to the nearest foot.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>0</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>84</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>15</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>56</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>50</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>82</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>16</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>FED_FUNDNG</attrlabl>
        <attrdef>Federal Agency Involvement in Funding (Alphanumeric)
Code identifying which federal agency was involved in funding of the dam. Codes are separated by semi-colon if several agencies were involved.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USAF</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>USDA NRCS</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CE</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USN</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>FED_DESIGN</attrlabl>
        <attrdef>Federal Agency Involvement in Design (Alphanumeric)
Code identifying which federal agency was involved in the design of the dam. Codes are separated by semi-colon if several agencies were involved.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>USDA NRCS</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USAF</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CE</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USN</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>FED_CONSTR</attrlabl>
        <attrdef>Federal Agency Involvement in Construction (Alphanumeric)
Code identifying which federal agency was involved in the construction of the dam. Codes are separated by semi-colon if several agencies were involved.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>USDA NRCS</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USAF</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CE</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USN</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>FED_REG</attrlabl>
        <attrdef>Federal Agency Involvement in Regulatory (Alphanumeric)
Code identifying which federal agency is involved in the regulation of the dam. Codes are separated by semi-colon if several agencies are involved.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USAF</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>FERC</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CE</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USN</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOL MSHA;DOL MSHA</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>FED_INSPCT</attrlabl>
        <attrdef>Federal Agency Involvement in Inspection (Alphanumeric)
Code identifying which federal agency is involved in the inspection of the dam. Codes are separated by semi-colon if several agencies are involved.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USAF</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>FERC</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>USDA NRCS</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CE</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USN</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOL MSHA;DOL MSHA</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>FED_OPERAT</attrlabl>
        <attrdef>Federal Agency Involvement in Operation (Alphanumeric)
Code identifying which federal agency is involved in the operation of the dam. Codes are separated by semi-colon if several agencies are involved.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USAF</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CE</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USN</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>FED_OWNER</attrlabl>
        <attrdef>Federal Agency Owner (Alphanumeric)
Code identifying which federal agency partly or wholly owns the dam. Codes are separated by semi-colon if several owners are involved.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USAF</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CE</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USN</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>FED_OTHER</attrlabl>
        <attrdef>Federal Agency Involvement &#8211; Other (Alphanumeric)
Code identifying which federal agency is involved in other aspects of the dam. Codes are separated by semi-colon if several owners are involved.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USAF</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CE</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USN</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>SRC_AGENCY</attrlabl>
        <attrdef>Source Agency (Alphanumeric)
Calculated Field: Primary state or federal agency responsible for data.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>FL</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USAF</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>FERC</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>CE</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOI BIA</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>DOD USN</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>STATE</attrlabl>
        <attrdef>State (Alphanumeric)
State where dam is located.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>FL</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>SUBMIT_DT</attrlabl>
        <attrdef>Submit Date (Date)
Calculated Field: Date data was submitted to the US Army Corps of Engineers for inclusion to the National Inventory of Dams.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>03-AUG-18</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>02-NOV-18</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>05-AUG-18</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>30-SEP-18</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>04-OCT-18</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>18-OCT-18</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>URL</attrlabl>
        <attrdef>URL Address (Alphanumeric)
Web Site for more information on particular dam. This information is not collected at this time and represents a placeholder for future data collection.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>CONG_NAME</attrlabl>
        <attrdef>Congressional Representative (Alphanumeric)
Calculated Field: Name of congressional representative for the congressional district where dam is located. Congressional District is generated based on provided coordinates. If no coordinates are provided, then this field will be left blank.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>PARTY</attrlabl>
        <attrdef>Congressional Representative Party (Alphanumeric)
Calculated Field: Name of political party associated with the congressional representative for the congressional district where dam is located. Congressional District is generated based on provided coordinates. If no coordinates are provided, then this field will be left blank.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>R</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>D</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>CONG_DIST</attrlabl>
        <attrdef>Congressional Representative District (Alphanumeric)
Calculated Field: Congressional District where dam is located. Congressional District is generated based on provided coordinates. If no coordinates are provided, then this field will be left blank.</attrdef>
        <attrdefs>Producer defined</attrdefs>
      </attr>
      <attr>
        <attrlabl>OTHERSTRID</attrlabl>
        <attrdef>Other Structure ID.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>S001</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>NUMSEPSTR</attrlabl>
        <attrdef>Number Separate Structures.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>0</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>2</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>1</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>PERMITAUTH</attrlabl>
        <attrdef>Permitting Authority.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>Y</edomv>
            <edomvd>Yes</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>N</edomv>
            <edomvd>No</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>INSPECAUTH</attrlabl>
        <attrdef>Inspection Authority.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>Y</edomv>
            <edomvds>Producer defined</edomvds>
            <edomvd>Yes</edomvd>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>N</edomv>
            <edomvd>No</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>ENFRCAUTH</attrlabl>
        <attrdef>Enforcement Authority.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>Y</edomv>
            <edomvds>Producer defined</edomvds>
            <edomvd>Yes</edomvd>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>N</edomv>
            <edomvd>No</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>JURIS_DAM</attrlabl>
        <attrdef>State Jurisdictional Dam.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>Y</edomv>
            <edomvds>Producer defined</edomvds>
            <edomvd>Yes</edomvd>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>N</edomv>
            <edomvd>No</edomvd>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>EAPLASTREV</attrlabl>
        <attrdef>Date of Last Revision of Emergency Action Plan.</attrdef>
        <attrdefs>Producer defined</attrdefs>
        <attrdomv>
          <edom>
            <edomv>&lt;&lt; empty cell &gt;&gt;</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>30-JUN-17</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>19-DEC-17</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>01-JUL-17</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>25-JUL-17</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>29-JUN-18</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>11-AUG-18</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
        <attrdomv>
          <edom>
            <edomv>15-MAR-18</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>PRIMARY_PU</attrlabl>
        <attrdef>The primary purpose for which the reservoir is used.</attrdef>
        <attrdefs>GeoPlan</attrdefs>
      </attr>
      <attr>
        <attrlabl>LAT_DD</attrlabl>
        <attrdef>Latitude in decimal degrees.</attrdef>
        <attrdefs>GeoPlan</attrdefs>
      </attr>
      <attr>
        <attrlabl>LONG_DD</attrlabl>
        <attrdef>Longitude in decimal degrees.</attrdef>
        <attrdefs>GeoPlan</attrdefs>
      </attr>
      <attr>
        <attrlabl>MGRS</attrlabl>
        <attrdef>Military Grid Reference System (MGRS) Coordinate of the Facility. The MGRS is the geocoordinate standard used by NATO militaries for locating points on the earth. The MGRS provides a means to represent any location on the surface of the Earth using an alphanumeric string. Hierarchical references are based on the Universal Transverse Mercator (UTM) coordinate system. The MGRS is used for the entire earth. http://mgrs-data.org/</attrdef>
        <attrdefs>GeoPlan</attrdefs>
      </attr>
      <attr>
        <attrlabl>GOOGLEMAP</attrlabl>
        <attrdef>Webpage hyperlink to location in Google Maps.</attrdef>
        <attrdefs>GeoPlan</attrdefs>
      </attr>
      <attr>
        <attrlabl>DESCRIPT</attrlabl>
        <attrdef>A combination of the fields Dam Name and  NID ID.</attrdef>
        <attrdefs>GeoPlan</attrdefs>
      </attr>
      <attr>
        <attrlabl>FGDLAQDATE</attrlabl>
        <attrdef>The date GeoPlan acquired the data from the source.</attrdef>
        <attrdefs>GeoPlan</attrdefs>
        <attrdomv>
          <edom>
            <edomv>2019-11-15</edomv>
            <edomvds>Producer defined</edomvds>
          </edom>
        </attrdomv>
      </attr>
      <attr>
        <attrlabl>AUTOID</attrlabl>
      </attr>
    </detailed>
    <overview>
      <eaover>FEDERAL AGENCY CODE TABLE

Federal Agency Name                             Federal Agency Code

Natural Resources Conservation Serv             USDA NRCS
Formerly Soil Conservation Serv (SCS)
	
Forest Service                                  USDA FS

Rural Housing Service                           USDA RHS

US Army Corps of Engineers                      CE
	
US Army                                         DOD USA
	
US Navy                                         DOD USN

US Air Force                                    DOD USAF
	
Bureau of Reclamation                           DOI BR

Bureau of Indian Affairs                        DOI BIA

Bureau of Land Management                       DOI BLM

Fish and Wildlife Service                       DOI FWS
	
Geological Survey                               DOI GS

National Park Service                           DOI NPS
	
Mine Safety and Health Administration           DOL MSHA

International Boundary and Water Commission     IBWC
	
Federal Energy Regulatory Commission            DOE FERC
	
Nuclear Regulatory Commission                   US NRC
	
Tennessee Valley Authority                      TVA</eaover>
    </overview>
  </eainfo>
  <distinfo>
    <distrib>
      <cntinfo>
        <cntorgp>
          <cntorg>Florida Geographic Data Library (FGDL)</cntorg>
        </cntorgp>
        <cntaddr>
          <addrtype>mailing</addrtype>
          <address>431 Architecture PO Box 115706</address>
          <city>Gainesville</city>
          <state>Florida</state>
          <postal>32611-5706</postal>
          <country>US</country>
        </cntaddr>
        <cntemail>For FGDL Software: http://www.fgdl.org/software.html</cntemail>
        <cntemail>Web site: http://www.fgdl.org</cntemail>
        <cntemail>Mailing list for FGDL: http://www.fgdl.org/fgdl-l.html</cntemail>
        <cntemail>FGDL Frequently Asked Questions: http://www.fgdl.org/fgdlfaq.html</cntemail>
        <cntemail>Technical Support: http://www.fgdl.org/fgdlfeed.html</cntemail>
      </cntinfo>
    </distrib>
    <resdesc>DOWNLOADABLE DATA</resdesc>
    <distliab>The Florida Geographic Data Library is a collection of Geospatial Data compiled by the University of Florida GeoPlan Center with support from the Florida Department of Transportation. GIS data available in FGDL is collected from various state, federal, and other agencies (data sources) who are data stewards, producers, or publishers. The data available in FGDL may not be the most current version of the data offered by the data source. University of Florida GeoPlan Center makes no guarantees about the currentness of the data and suggests that data users check with the data source to see if more recent versions of the data exist. Furthermore, the GIS data available in the FGDL are provided 'as is'. The University of Florida GeoPlan Center makes no warranties, guaranties or representations as to the truth, accuracy or completeness of the data provided by the data sources. The University of Florida GeoPlan Center makes no representations or warranties about the quality or suitability of the materials, either expressly or implied, including but not limited to any implied warranties of merchantability, fitness for a particular purpose, or non-infringement. The University of Florida GeoPlan Center shall not be liable for any damages suffered as a result of using, modifying, contributing or distributing the materials. A note about data scale: Scale is an important factor in data usage. Certain scale datasets are not suitable for some project, analysis, or modeling purposes. Please be sure you are using the best available data. 1:24000 scale datasets are recommended for projects that are at the county level. 1:24000 data should NOT be used for high accuracy base mapping such as property parcel boundaries. 1:100000 scale datasets are recommended for projects that are at the multi-county or regional level. 1:125000 scale datasets are recommended for projects that are at the regional or state level or larger. Vector datasets with no defined scale or accuracy should be considered suspect. Make sure you are familiar with your data before using it for projects or analysis. Every effort has been made to supply the user with data documentation. For additional information, see the References section and the Data Source Contact section of this documentation. For more information regarding scale and accuracy, see our webpage at: http://geoplan.ufl.edu/education.html</distliab>
    <stdorder>
      <digform>
        <digtinfo>
          <formname>Digital Data</formname>
        </digtinfo>
      </digform>
    </stdorder>
    <techpreq>This data is intended for use with a Geographic Information Systems or Remote Sensing software package.</techpreq>
  </distinfo>
  <metainfo>
    <metd>20210729</metd>
    <metc>
      <cntinfo>
        <cntorgp>
          <cntorg>USACE - Army Geospatial Center</cntorg>
          <cntper>Rebecca Ragon</cntper>
        </cntorgp>
        <cntpos>Geospatial Systems Directorate, Technology Integration Branch</cntpos>
        <cntaddr>
          <addrtype>mailing and physical</addrtype>
          <address>7701 TELEGRAPH RD.</address>
          <city>ALEXANDRIA</city>
          <state>VA</state>
          <postal>22315</postal>
          <country>US</country>
        </cntaddr>
        <cntvoice>703-428-6820</cntvoice>
        <cntemail>Rebecca.ragon@usace.army.mil</cntemail>
        <cntinst>nid@usace.army.mil</cntinst>
      </cntinfo>
    </metc>
    <metstdn>FGDC Content Standard for Digital Geospatial Metadata</metstdn>
    <metstdv>FGDC-STD-001-1998</metstdv>
    <mettc>local time</mettc>
  </metainfo>
</metadata>